for RoGator
Large Tree
-
Use the provided U-bolts to install the center rack position sensor bracket on the tube near the top of the right-hand damper.
Note: Thread approximately 1 inch through the bracket.
-
Install the height stop sensor assembly to the bracket shown above and secure with panel nuts.
-
Connect the 115-0235-041 cable to the height stop sensor.
-
Use the provided U-bolts to install the center rack position target below the center rack height sensor.
Small Tree
-
Use the provided U-bolts to install the center rack position bracket on the tube near the top of the right-hand damper.
-
Install the height stop sensor assembly to the bracket in the position shown above.
-
Connect the 115-0235-041 cable to the height stop sensor.
-
Use the provided U-bolts to install the center rack position target below the center rack height sensor.
Last Revised: Jul 2024