The AutoBoom® XRT system is designed to provide automated boom height adjustment for agricultural equipment.
This installation procedure applies to the following machines:
MAKE: RoGator
MODEL: 900C, 1100C, 1300C
YEAR: 2018-2019
The image below shows approximate installation locations for the sensor and nodes. Depending on machine configuration and desired performance some of the sensors and dampers may not be installed.
-
Radar Boom Sensors
-
ABM Node
-
Hydraulic Valve
-
Tilt Sensor
-
Rotary Sensor
-
Variable Damper
-
Proximity Sensor
For additional information on the component installation, refer to:
-
Rotary sensor installation instructions at Install the Rotary Sensor for RoGator C.
-
Variable damper installation instructions at Install the Damper for RoGator C.
-
REM node installation instructions at Mount the AutoBoom® XRT Valve for RoGator C.
-
ABM node installation instructions at ABM and REM Node Installation for RoGator C.
-
Boom sensor installation information at Mount the Boom Sensors for RoGator C
Last Revised: Jul 2024