Requirements for Operation

This guide details the steps necessary to install Augmenta on a standard cabin roof. These instructions are applicable in most situations.

• Please contact Raven Support should you have any inquires.

• Before commencing installation, please ensure your machine at operational height and is stationary on flat level ground, with equal front and rear tire pressures.

• Thoroughly clean the cabin’s roof removing all contaminants, waxes or residues. Do not use cleaning products that will leave a residual film, as this will result in a poor bond between the mount’s VHB tape and the roof.

In order to operate properly, the Augmenta Field Analyzer must be the tallest entity on the cab so nothing can cast shadows on its light sensor.

Last Revised: Nov 2024