ISOBUS Diagnostics

  1. If TC Status and Implement connection state “Disconnected” instead of “Connected” , perform a full key cycle.

  2. If rate mode states “Manual” check to make sure your rate is set to “Auto”. This setting can be part of the Implement configuration (through the UTClosed A Universal Terminal (formerly Virtual Terminal) is an electronic display or console capable of interfacing with ECUs on an ISOBUS network. client page) and/or the ISOBUS Display/TC configuration (set rate to Auto if available). The steps that must be followed are the same as the ones needed to perform a VRAClosed Variable Rate Application utilizes a prescription (Rx) map for a given field and product to automatically adjust the rate of application based upon the target rate zones within the field. The .shp, .shx, and .dbf files required to create a shapefile prescription map must be in a polygon shape format that complies with the ESRI (Environmental Systems Research Institute) shapefile specifications and must also be in the WGS (World Geodetic System) 84 datum. application with a prescription mapClosed Variable Rate Application utilizes a prescription (Rx) map for a given field and product to automatically adjust the rate of application based upon the target rate zones within the field. The .shp, .shx, and .dbf files required to create a shapefile prescription map must be in a polygon shape format that complies with the ESRI (Environmental Systems Research Institute) shapefile specifications and must also be in the WGS (World Geodetic System) 84 datum..

  3. If section mode states “Manual” check if section control is set to “Auto” and if your license is set up correctly. This setting can be part of the Implement configuration (through the UT client page) and/or the ISOBUS Display/TC configuration (set rate to Auto if available).

  4. If ISOBOX status states "Disconnected" , check your task status. It is likely that this is a cabling / harness issue. Please check cabling from the ISOBOX to the Field Analyzer.

  5. If you still encounter problems, please contact Raven support.

Last Revised: Nov 2024