Viper® 4+ Overview

The Raven Operating Software, or ROS, assists with managing an implement fleet and multiple equipment operators. See ROS Features.

The Viper® 4+ enclosure is designed to resist the conditions experienced in the field to help ensure that the field computer is ready to operate when you are. The enclosed case design provides dust and splash resistance, even in open or exposed cabin vehicles and tractors. The lightweight magnesium alloy provides excellent heat transfer properties to keep the Viper® 4+ operating efficiently, even in direct sunlight.

Note:  The case is designed to allow a small air gap 1/8 inch [3 mm] between the mounting bracket and the case to allow air flow over the case cooling fins. Do not seal or obstruct this air gap, or otherwise modify the case.

It is normal for the case to become warm to the touch while in operation.

Transflective screen technology provides clear screen visibility across a range of lighting conditions and even in direct sunlight. Resistive touch screen functionality places menus and options at the operator’s finger tips. A 12.1 in. [30.7 cm] high resolution display provides a large viewing area and easy to read display that allows the operator to quickly reference information during in field operations. The screen utilizes an enhanced brightness display and a Projected Capacitance (PCAP) touchscreen for added visibility and functionality.

Power Status LED

The power button on the Viper® 4+ also doubles as the status indicator. When the Viper® 4+ is powered up, the LED will flash red for a few seconds then switch to green.

Note:  Review the installation information provided with any external DGPS Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. equipment to install and connect the Viper® 4+.

The Viper® 4+ is available with either of the following options:

• Viper® 4+ base unit without an integrated GPS solution (P/N 063-0173-776)

• Viper® 4+ with integrated, scalable dual frequency DGPS Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. receiver (P/N 063-0173-775)

These configurations allow the Viper® 4+ to integrate into existing precision agriculture systems or installed as the first building block for equipping a precision agriculture solution your current operations.

The Viper® 4+ with integrated DGPS Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. receivers provide the in-cabin components necessary to start adding precision agriculture tools into a few implements in the machine shed or an entire fleet. With an integrated DGPS Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. receiver, the Viper® 4+ may be quickly transferred between tractors, applicators, swathers, and harvesters for use throughout the growing season.

Whether equipped with an integrated DGPS Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. receiver or not, the Viper® 4+ may be integrated into machines with existing DGPS Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. solutions to utilize or enhance existing DGPS Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. equipment already in the vehicle cabin.

Note:  When used with an external DGPS Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. receiver, the internal receiver will not be used during field operations. If the external receiver stops providing signal during the field operation, the internal DGPS Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. receiver may be enabled to allow operations to continue.

The Viper® 4+ provides speed-compensated monitoring or automatic control features for a variety of field operations. Whether monitoring seed population, application rate, or harvest yield information, the information displayed to the operator is automatically adjusted for the current equipment speed. If the console is configured for automatic equipment control, the console will automatically make adjustments to the seed or product rate control system to adjust for changes in the equipment speed. These features allow the operator to observe other equipment functions and guide the vehicle during field operations, help reduce operator fatigue during long operating sessions, and reduce critical input, application, or yield errors.

Note:  Additional hardware may be required to allow the field computer to control equipment functions automatically. Contact a local Raven dealer for a complete list of available features for use with the console and more information on optional control systems and components.