Hardware Information
To access information about the ROS device hardware:
- Select the Administrator Panel
icon in the top left corner of the display. -
Select the System Manager
utility. -
Select the Hardware Information
tab. -
Select the General or Lifetime views to display the following hardware information details for the ROS device:
General
Provides information on the hardware such as:
Platform
The ROS device type or name.
OEM ID
Displays the OEM ID number.
Hardware Revision
The ROS device hardware version.
Micro-controller Version
The firmware version installed on-board the ROS device.
FPGA Version
Firmware version of the FPGA controller.
Lifetime
The lifetime statics provides runtime information for the ROS device. The following information will be available when the lifetime option is selected:
Hardware Lifetime
Provides a tally of operational hours on the ROS device, the number on power cycles, and the number of shutdowns.
Hardware Status
Includes information on the switch power, camera power, camera fault, and FPGA fault.
Usage
Provides CANbus information such as warning counts, bus off counts, and on error status.
Networking
Provides information on the IP address, gateway, and the interface name.
Last Revised: Jul 2024