ISOBUS Settings

The ISOBUS Settings page provides options to identify connected ISOBUS devices, clear the ISOBUS Object PoolClosed The user interface for a system or feature connected to an ISOBUS UT. or change the ISOBUS Universal Terminal (UTClosed A Universal Terminal (formerly Virtual Terminal) is an electronic display or console capable of interfacing with ECUs on an ISOBUS network.) instance when multiple universal terminals are available on the ISOBUS. To access the UTClosed A Universal Terminal (formerly Virtual Terminal) is an electronic display or console capable of interfacing with ECUs on an ISOBUS network. Settings page:

  1. Select Settings on the bottom left of the Home screen. The Settings Menu will open.

  2. Select ISOBUS on the Settings menu. The Diagnostic Trouble Codes (DTCs) window will open. The DTCs tab is for displaying and managing the diagnostic trouble codes from a connected ECUClosed Electronic Control Unit.

  3. Select the UTClosed A Universal Terminal (formerly Virtual Terminal) is an electronic display or console capable of interfacing with ECUs on an ISOBUS network. Settings tab to modify the UTClosed A Universal Terminal (formerly Virtual Terminal) is an electronic display or console capable of interfacing with ECUs on an ISOBUS network. instance, reset the object poolClosed The user interface for a system or feature connected to an ISOBUS UT., or disable the TC functionality (to create a UTClosed A Universal Terminal (formerly Virtual Terminal) is an electronic display or console capable of interfacing with ECUs on an ISOBUS network. only mode).

  4. Select the Inspection tab to display or modify (when applicable) the current values of all ECUClosed Electronic Control Unit DDIs.

  5. Select the Logging tab to display or enable the CAN logging.

  6. Select the General tab to display additional ISOBUS settings or restart the CAN service.

  7. Select Accept to save the displayed settings and return to the Settings menu.

Last Revised: Jul 2024