Analog Video Camera Configuration

Configure Analog Video

Note:  This feature is only available on CR12™.

This topic describes how to configure the analog video from the Settings menu. For how to configure and operate the analog video widget on the Run screen, see View Analog Video.

To configure the analog video functions from the Settings menu:

1. Select Settings on the bottom left of the Home screen. The Settings Menu will open.
2. Select Analog Video on the Settings menu.
3. Up to four analog cameras will display. If desired, click on Camera 1-4 to rename the cameras.
4. Use the directional arrows to assign each camera to one of the numbers listed on the left side of the screen.

   Note:  Only one camera can be viewed at a time within a job.

5. If desired, assign one of the four cameras to the automatic rear view camera. This camera will automatically turn on when the machine is in reverse.

To configure the analog video functions while in a job:

1. Select and hold the Analog Video widget on the Run screen. The widget settings window will open.

Note:  For more information on adding widgets to the Run screen, refer to Edit Widget View.

2. Up to four analog cameras will display. If desired, click on Camera 1-4 to rename the cameras.
3. Use the directional arrows to assign each camera to one of the numbers listed on the left side of the screen.

   Note:  Only one camera can be viewed at a time within a job.

4. If desired, assign one of the four cameras to the automatic rear view camera. This camera will automatically turn on when the machine is in reverse.

Configure Camera

The ROS device can support up to four cameras.

To configure the camera views:

1. Select the Settings icon on the bottom right of the screen. The Settings Menu will open.

2. Locate and select the Camera module. The Camera Configuration window will be displayed.

3. Use the View drop-down options to configure the camera for each view.

4. Use the Reverse View drop-down to set the camera providing a reverse camera view if applicable.

5. Select the Enable Reverse Camera Popup to provide a reverse camera view popup on the ROS device when GPS detects that the machine is moving in reverse.