Localization

Configure Localization Settings

The Localization window provides options to adjust the language, time zone, and measurement units. To access Localization settings:

1. Select Settings on the bottom left of the Home screen. The Settings Menu will open.
2. Select Localization on the Settings menu. The Localization window will open.
3. Select the desired option from the Language drop-down.
4. Select the desired option from the Time Zone drop-down.

   Note:  The time zones are based on an offset from Coordinated Universal Time (UTC). Ex. Los Angeles is UTC-08:00, New York is UTC-05:00, Berlin is UTC+01:00, and Moscow is UTC+03:00.

5. Select either an AM/PM clock or a 24 hour clock under the Time Format drop-down.
6. Use the checkbox options to set the desired display units for Speed, Area, Weight, Volume, Pressure, and Temperature.
7. Select Accept to save the displayed settings and return to the Settings menu.

Configure Location Information

The location information tab provides fields for company contact information and desired display language. To access location information:

1. Select the Administrator Panel icon in the top left corner of the display.

2. Select the User Profile utility.

3. Select the Location Information tab on the General User Settings prompt. The following fields will be available:

   Company Name

   Enter the name of the company with which the operator or administrator is employed.

   Note:  The user name in the administrator profile cannot be modified.

   Company Address and Location

   Enter the company or branch address, city and state, and country of operation.

   Time Zone

   Select the Coordinated Universal Time (UTC) for the time zone in which the ROS device will be operating.

   Language

   Select one of the available languages desired for operation of the ROS device. Each equipment operator may select a different language for operation and ROS will automatically switch to the desired language on log in.

Configure Unit Preference

The Unit Preferences tab provides access to personalized language and display unit preferences. To configure unit preferences:

1. Select the Administrator Panel icon in the top left corner of the display.

2. Select the User Profile utility.

3. Select the Unit Preferences tab on the General User Settings prompt. The following fields will be available:

   Base Units

   Select the desired unit system:

   Unit System	Units
   Metric	centimeters (cm), liters (L), hectares (ha), kilometers per hour (km/h)
   U.S. (English)	inches (in), gallons (gal), acres (ac), miles per hour (mph)
   Turf	inches (in), gallons per 1000 square feet (gal/1000 ft²), miles per hour (mph)

   Pressure Units

   Select the desired pressure units:

   Abbreviation	Units
   PSI	Pounds per square inch
   kPa	Kilopascal
   bar	Bar or atmospheric
   inHg	Inches of mercury
   mmHg	Millimeters of mercury
   atm	Atmospheres
   hPa	Hectopascal

   Date Format

   Select the preferred date format.

   Time Format

   Select the preferred time format.

   Automatic Daylight Savings

   Enable automatic daylight savings time adjustments if the local time zone jurisdiction observes daylight savings time.