OmniSTAR
Note: ROS devices with internal GPS serial numbers higher than BFN1344xxxx are not compatible with OmniSTAR correction services. See GPS Information Tab for assistance with verifying the serial number of the receiver. Contact a local Raven dealer for information on correction services available for ROS devices with newer receivers or for additional assistance.
-
Select the Settings icon on the bottom right of the screen. The Settings Menu will open.
-
Locate and select the GPS module. The GPS Global Settings prompt will display.
-
Select the GPS Configuration button to the right of desired receiver. The Differential Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. Settings page will be displayed.
-
Select OmniSTAR along the left side of the differential Differential Global Positioning System is an enhancement to standard GNSS/GPS messages to provide better position accuracy. settings prompt.
The following information and options will be available when configuring a compatible receiver and using the OmniSTAR correction service:
Select the specific satellite for use with OmniSTAR correction services for the area of operations.
This option allows the operator to enable a custom satellite for use with the OmniSTAR subscription. Only enable this feature when instructed by an OmniSTAR technician.
If the custom satellite option is enabled, the custom frequency field displays the current satellite frequency used with OmniSTAR corrections.
If the custom satellite option is enabled, the custom rate field displays the current message rate for OmniSTAR corrections.
If the custom satellite option is enabled, the custom rate field displays the signal strength of the selected satellite.
The subscription status area displays the OmniSTAR subscription expiration date, type of subscription (e.g. HP, XP, VBS, or G2), and the OmniSTAR ID required for registration with the OmniSTAR correction service.
Last Revised: Jul 2024