Demonstration Mode

Set the ROS unit to demonstration mode to allow the unit to be used for display purposes. To switch to the demonstration mode:

1. Select the Settings icon on the bottom right of the screen. The Settings Menu will open.

2. Select the Demo Mode button in the lower, left corner of the display.

3. Select the option to Restart with the Demo Mode Enabled. The ROS device will restart with the demonstration mode features enabled.

4. Perform the above procedure again to toggle the demonstration mode off.

Note:  There is a Viper® 4+ Setup Demo for Raven CAN components at https://portal.ravenprecision.com.

Last Revised: Jul 2024