General User Settings

Note:  An administrator profile is available by default with ROS. It is recommended that the administrator profile be used only by an equipment owner or manager.

User Information Tab

The user information tab provides fields for entering the operator contact information. To enter or edit user information:

  1. Select the Administrator Panel icon in the top left corner of the display.

  2. Select the User Profile utility.

  3. Select the User Information tab on the General User Settings prompt. The following fields will be available:

    Enter the first and last name of the system administrator or equipment operator in these fields.

    Note:  The user name in the administrator profile cannot be modified.

    Enter the first and last name of the system administrator or equipment operator in these fields.

    Enter the home and mobile phone numbers, fax number, and e-mail address as desired for contacting the equipment operator in the associated fields.

    Enter the operator license and expiration date in these fields.

Location Information Tab

The location information tab provides fields for company contact information and desired display language. To access location information:

  1. Select the Administrator Panel icon in the top left corner of the display.

  2. Select the User Profile utility.

  3. Select the Location Information tab on the General User Settings prompt. The following fields will be available:

    Enter the name of the company with which the operator or administrator is employed.

    Note:  The user name in the administrator profile cannot be modified.

    Enter the company or branch address, city and state, and country of operation.

    Select the Coordinated Universal Time (UTC) for the time zone in which the ROS device will be operating.

    Select one of the available languages desired for operation of the ROS device. Each equipment operator may select a different language for operation and ROS will automatically switch to the desired language on log in.

Unit Preferences Tab

The Unit Preferences tab provides access to personalized language and display unit preferences. To configure unit preferences:

  1. Select the Administrator Panel icon in the top left corner of the display.

  2. Select the User Profile utility.

  3. Select the Unit Preferences tab on the General User Settings prompt. The following fields will be available:

    Select the desired unit system:

    Unit System Units
    Metric centimeters (cm), liters (L), hectares (ha), kilometers per hour (km/h)
    U.S. (English) inches (in), gallons (gal), acres (ac), miles per hour (mph)
    Turf inches (in), gallons per 1000 square feet (gal/1000 ft²), miles per hour (mph)

    Select the desired pressure units:

    Abbreviation Units
    PSI Pounds per square inch
    kPa Kilopascal
    bar Bar or atmospheric
    inHg Inches of mercury
    mmHg Millimeters of mercury
    atm Atmospheres
    hPa Hectopascal

    Select the preferred date format.

    Select the preferred time format.

    Enable automatic daylight savings time adjustments if the local time zone jurisdiction observes daylight savings time.

System Preferences Tab

The System Preferences tab provides access to settings to customize the ROS device display and operation.

To adjust system preferences:

  1. Select the Administrator Panel icon in the top left corner of the display.

  2. Select the User Profile utility.

  3. Select the System Preferences tab on the General User Settings prompt. The following fields will be available:

    Set the display mode for day or night operations.

    Adjust the LED brightness for personal preference and ambient lighting conditions. This setting will also adjust the brightness of a compatible light bar connected to the ROS device.

    Adjust the LED brightness for personal preference and ambient lighting conditions. This setting will also adjust the brightness of a compatible light bar connected to the ROS device.

    Enable the automatic power down option to automatically shut down the ROS device when the vehicle ignition is switched off. This feature may be enabled to help ensure job information is saved and the device is properly powered down.

    Note:  The default setting for the power down feature is enabled. To monitor the vehicle ignition status, the field computer will require the appropriate wiring harness and a connection to the vehicle ignition. Without the appropriate harness, the power down feature will have no affect on operation of the ROS device.

Alarm Settings Tab

To edit Alarm Settings:

Note:  Audible and pop-up alarms will be triggered based upon the product control user settings. Refer to Product Rate Control Configuration for details on these user settings.

  1. Select the Administrator Panel icon in the top left corner of the display.

  2. Select the User Profile utility.

  3. Select the Alarm Settings tab in the General User Settings prompt. The following fields will be available:

    Enable this option to receive audible alerts for alarm conditions detected by the ROS device.

    Enable this option to receive a prompt for alarm conditions detected by the ROS device.

    Select this check box to enable an Audible Backup Warning alarm.

    Adjust the alarm volume on the Audio Volume slider.

Administrator Options Tab

When logged in as a system administrator, the Administrator Options tab provides access to the utilities to manage and edit user profiles. To access the system Administrator Options:

Note:  The Administrator Options tab will only be available when logged in with the administrator profile.

  1. Select the Administrator Panel icon in the top left corner of the display.

  2. Select the User Profile utility.

  3. Select the Administrator Options tab on the General User Settings prompt.

    The following fields will be available:

    Select this option to enable the user login feature on the ROS device. When enabled, the system administrator may create and manage multiple users or equipment operator profiles.

    Refer to Create User Profiles for details on creating new user profiles or Edit or Delete User Profiles for assistance with managing user profiles.

    Enable this option to require a personal identification number, or PIN, to access ROS and the control system features. This feature is recommended to help secure the control system from unauthorized access or operation.

    The administrator PIN field is displayed below the “Require PINs” option. Enter the desired administrator PIN or personal identification number used to log into the administrator profile.

    Note:  Raven will not be able to recover or reset the administrator PIN if the default (1111) is changed. Be sure to write down the administrator PIN and store it in a safe place to ensure the ability to create user accounts remains accessible.

User Profile Security Options Tab

The Security Options tab allows the profile user to enter a new personal identification number, or PIN, for secure login. To access the Security Options tab:

  1. Select the Administrator Panel icon in the top left corner of the display.

  2. Select the User Profile utility.

  3. Select the Administrator Options tab on the General User Settings prompt.

  4. Select the Security Options tab on the General User Settings prompt. The following fields will be available:

    Enter the desired personal identification number used to log into the profile.

Last Revised: Jul 2024