Note: CRX will store the last ten screen shots. CRX will begin replacing stored screen shots after ten screens are captured. Refer to Export Screen Shots to transfer screen shots to a USB drive for viewing.
Save Screen Shots
There are two ways to capture screen shots:
Use the Power Button
- Press the power button until the Power Button Pressed prompt is displayed.
- Select Screen Capture.
- To move files from the CRX to a USB stick, perform the steps in Export Screen Shots.
Export Screen Shots
- Select Settings on the bottom left of the Home screen. The Settings Menu will open..
- Select File Manager on the Settings menu. The File Management window will open..
- Select Diagnostics on the footer bar. The Send Diagnostics window will open.
- Select the desired USB drive from the Send To drop-down.
- Select Screen Capture.
- If desired, enter a comment about the screen shot.
- Select Eject USB to properly save the information on the USB stick so it can be removed.
- Select Accept to return to the File Management window.
- Select Accept to return to the Settings menu.
- Select Accept to return to the Home screen.
View Screen Shots
To view the screen shot after the screen shot has been exported to a USB drive:
- Complete the Export Screen Shots procedure to transfer the screen shot to a USB drive.
- Insert the USB into a computer.
- Use the file browser to open the USB drive directory.
- Navigate to the screen shots folder.
- View or copy the screen captures as desired.
Save Screen Shots
Capturing screen shots is possible while working in and out of jobs.
-
Quickly press and release the power button. The screen shot is saved as soon as the power button is pressed. A Shutdown Requested window will open.
-
Select the Save or Save ScreenShot button.
-
After capturing a screen shot, export the data via file maintenance. Refer to the Export Other Field Operation Files section of the File Export page for more information.
