Saved Guidance Lines and Patterns
Guidance lines and patterns can be saved in the Raven field computer for later use in field operations.
Create a Guidance Set
A guidance set is a collection of AB, A+, and contour guidance lines. This can assist in organizing guidance lines and enables smart switching with the EasySwath widget. Refer to EasySwath for more information on switching guidance lines with the EasySwath widget.
To create a guidance set:
- Select the Guidance Lines icon along the right side of the run screen.
Note: The guidance line icon is the lowest icon on the right side of the Run screen and will be displayed as one of the available guidance line options.
-
Select the Guidance Set icon. A list of available guidance lines will appear.
-
Select any guidance lines that are desired to be added to the set.
Note: If a guidance line has already been loaded, it will be automatically included in the guidance set.
-
Once all desired guidance lines have been selected, select the Close button to save and activate the guidance set.
-
To edit the guidance set, select the Guidance Set icon again.
-
To rename the guidance set, select the Edit button.
-
To unload the guidance set, select the Cancel button.
-
To load a saved guidance set, select the Load icon.
Save AB Guidance Paths
Saving an AB guidance path allows the line to be assigned to a job profile or selected when setting up for a field operation.
Note: Only the active AB guidance paths will be saved. Last pass paths will not be stored by ROS.
To save the displayed guidance path:
-
Select the AB Utilities widget to display the Swath Tools prompt.
-
Select the More button to access the Nudge and Swath prompt.
Note: The nudge features are also available on the Nudge and Swath prompt. Refer to Nudge Features and Tools for assistance with using AB guidance nudge during field operations.
-
Select the Save button.
-
Select the Name field to the right side of the Save Guidance Line screen and use the on-screen keyboard to create a new guidance path or select an existing guidance path to replace.
Note: If the guidance line is saved in a cloud job, the line will be available to be loaded by other field computers that join the cloud job.
Loading a Saved Guidance Path
To load a guidance path into the current field operation:
-
Select the AB Utilities widget to display the Swath Tools prompt.
-
Select the More button to access the Nudge and Swath prompt.
Note: The nudge features are also available on the Nudge and Swath prompt. Refer to Nudge Features and Tools for assistance with using AB guidance nudge during field operations.
-
Select the Load button.
-
Select either the Path List tab or Path Map tab to locate and select the desired guidance path to be loaded.
-
Select the path from the list or on the map and select the Done button to load the selected path into the job for the current field operation.
Last Revised: Jul 2024
Click Here for 
