Change the Operation Screen View
All icons on this page are available in their respective field computer on the run/guidance screens. These icons allow the user to change or alter aspects of the run/guidance screen.
CRX Icon
ROS Icon
Description
Change Field View
Select one of the following icons
Select this view to use a three dimensional view of the current machine position in the field area.
Toggle to the 2D over-head view of the Run screen during active field operations.
The field review mode allows the operator to move the display to any portion of the field area to review coverage or operation data for the current operation.
Note: Select a completed field boundary in the field review mode to display the boundary area.
The widget view provides the operator with a view for additional widgets, tools, and other feature controls necessary during various field operations and allows the operator to place as many widgets as necessary without covering guidance or field information.
Note: Refer to Configure Widget Layouts for more information on editing widget layouts.
Change Zoom Level
Zoom into the Run screen map.
Zoom out on the Run screen map.
Select the zoom icon in the lower, left corner of the display and use the sliding bar to adjust the zoom level desired for monitoring the field operation on the ROS display.
Note: While using the 3D Guidance mode, the zoom slider will also adjust the view angle for down-field or overhead view of the vehicle location.
In the field review mode, select the coverage extents icon along the bottom of the display to automatically set the zoom to display the extents of the coverage area, scout map A map of field features or areas of interest in a field. Field features may include, but are not limited to field boundaries, weed or insect infestations, tile lines or waterways, rocks and rock piles, trees, spray or no-spray zones, etc.), or prescription map Variable Rate Application utilizes a prescription (Rx) map for a given field and product to automatically adjust the rate of application based upon the target rate zones within the field. The .shp, .shx, and .dbf files required to create a shapefile prescription map must be in a polygon shape format that complies with the ESRI (Environmental Systems Research Institute) shapefile specifications and must also be in the WGS (World Geodetic System) 84 datum. completed or loaded into the job.
Note: Select a completed field boundary in the field review mode to display the area within the Scout Group.
Vehicle Centering and Locking
Adjust the map so the vehicle is in the center.
In the field review mode, select the vehicle lock icon along the bottom of the display to keep the field review display centered on the current vehicle position during field operations.
Last Revised: Jul 2024