Create a Do Not Apply Zone or Application Zone

Do not apply zones indicate an area in the field where application is prohibited.

1. Select the Scout Object icon on the Run screen.
2. Select Add next to Scout Features.
3. Select Do Not Apply Zone.
4. Select Recording point if desired to set the offset point for the recording.

   

5. Select Start Recording.
6. Drive the desired path of the do not apply zone.
7. When complete, select Scout Object if the toolbar was closed.
8. Select either Pause Recording or End Recording.
9. After selecting End Recording, select Accept to confirm the end of the job if selected.
10. Enter a name for the new zone. If desired, select Delete.

Application zones indicate an area where product should always be applied. They are generally used inside a do not apply zone.

1. Select the Scout Object icon on the Run screen.
2. Select Add next to Scout Features.
3. Select Application Zone.
4. Select Recording point if desired to set the offset point for the recording.

   

5. Select Start Recording.
6. Drive the desired path of the application zone.
7. When complete, select Scout Object if the toolbar was closed.
8. Select either Pause Recording or End Recording.
9. After selecting End Recording, select Accept to confirm the end of the job if selected.
10. Enter a name for the new zone. If desired, select Delete.