Certification and Compliance

Roadway Homologation

The Accept Roadway HomologationClosed Approval or certification of devices (especially electrical and communications devices) for use in specific regions or countries. Terms page will be displayed during the initial calibration of the RS1™ system in either of the following conditions:

  • Operating with a generic tune-set
  • Operating on the European continent

Carefully review the on-screen disclaimer before proceeding.

When roadway homologation is enabled, the following parameters will be applied to RS1™ operation:

  • An operator presence method will be required while operating with the RS1™ auto-steering system enabled.
  • Auto-steering cannot be enabled above 19 mph [30.5 km/h].
  • Auto-steering will disengage above 21 mph [33.8 km/h].

Certifications

Note:  The Raven RS1™/SC1™ system is an approved steering system per the requirements of 2009/66/EC, § 38 StVZO (EU) 2015/208 IV and V incl. all amendments up to (EU) 2015/208. By GTÜ No. GTÜ 2015/208/V-19002.00.

A copy of the full report may be requested by contacting Raven Europe.

Safety Notes

  • The system “RS1™/SC1™” can be installed by authorized dealers/workshops only.

  • Before driving on public roads:

    • the “RS1™/SC1™” has to be switched off by the master switch.

    • the monitor must be mounted outside of the required visibility of the driver.

ANATEL Compliance Statement

Note:  RS1™ units with part number 063-0173-922 include the following compliant modules.

Este produto contém a placa CC IMX6 código de homologação Anatel 02268-19-01209.

Este produto contém a placa Skywire código de homologação Anatel 00014-16-10218.

Last Revised: Jul 2024