Connect RS1™ to a Wi-Fi® Network

Follow the steps below to connect the RS1™ to an available Wi-Fi® network.

1. Select the Slingshot® button from the UT A Universal Terminal (formerly Virtual Terminal) is an electronic display or console capable of interfacing with ECUs on an ISOBUS network. menu.

   

2. From the Slingshot® Home page, select the Wi-Fi® Status icon.

   

3. Select the Refresh button in the lower, left corner of the Wi-Fi® Connection Status page.

   

4. Next, select the desired network name (SSID Service Set IDentifier) to join from the list of available Wi-Fi® networks.
5. Enter the network password. The network to which the RS1™ is currently connected will display a green check mark on the Wi-Fi® Connection Status page.

Last Revised: Jul 2024

“Wi-Fi® is a U.S. registered trademark of Wi-Fi Alliance”