Mount and Secure the OMNiDRIVE™ Device Plate

Once all cables have been routed and connected:

  1. Coil and tuck excess cable length behind the device plate.
  2. Set the tabs of the bracket into the metal tabs were the factory trim panel fastened and press the device plate in place.

  3. Replace the trim pieces, covers, and floor mat to finish installation.

    Note:  It may be desirable to test the OMNiDRIVE™ system prior to securing all trim and covers or reassembling the steer column panels.

P/N 016-2610-001 Rev. B Aug 2021 E37866