Field Provisioning Overview
The field provisioning procedures configure components of the OMNiDRIVE™ system to the tractor and for proper machine-to-machine communication. Complete the provisioning procedures to ensure each machine to be used as part of the OMNiDRIVE™ system.
Field provisioning must be completed for the following types of machine operating within the OMNiDRIVE™ system:
The autonomous tractor and grain cart. Please review the provisioning procedure for your specific make and model tractor.
Refer to Activate the Slingshot® Field Hub for the OMNiDRIVE™ Tractor to get started with provisioning the OMNiDRIVE™ tractor.
The controlling combine The combine that may assign paths to, and may sync with, the OMNiDRIVE™ tractor. One controlling combine is required for all OMNiDRIVE™ locations. is the machine with which the OMNiDRIVE™ tractor will sync during autonomous grain cart operations.
Refer to Activate the Slingshot® Field Hub for the OMNiDRIVE™ Combine to get started with provisioning a combine to control OMNiDRIVE™ autonomous operations.
Non-controlling combines will add data to the harvest coverage map which will allow the OMNiDRIVE™ tractor plan routes as field area is harvested.
Note: The OMNiDRIVE™ tractor cannot sync with non-controlling combines for autonomous grain handling operation.
Refer to Activate the Slingshot® Field Hub for the OMNiDRIVE™ Combine to get started with provisioning a combine to add to the harvested area for autonomous vehicle operations.
P/N 016-2610-001 Rev. B Aug 2021 E37866