Configure Analog Video

Note:  This feature is only available on CR12®+.

This topic describes how to configure the analog video from the Settings menu. For how to configure and operate the analog video widget on the Run screen, see Use Analog Video.

To configure the analog video functions from the Settings menu:

1. Select Settings on the bottom left of the Home screen. The Settings Menu will open.
2. Select Analog Video on the Settings menu.
3. Up to four analog cameras will display. If desired, click on Camera 1-4 to rename the cameras.
4. Use the directional arrows to assign each camera to one of the numbers listed on the left side of the screen.

   Note:  Only one camera can be viewed at a time within a job.

5. If desired, assign one of the four cameras to the automatic rear view camera. This camera will automatically turn on when the machine is in reverse.

Last Revised: Mar 2025