Status Header Bar

CRX Icon

ROS Icon

Description

N/A

The status of a Slingshot® connection is displayed. When the icon is gray, Slingshot® is not connected. When the icon is green, Slingshot is connected. A green arrow will display on the green icon when Slingshot® is currently transferring data. The green bars indicate the current Slingshot® signal strength.

N/A

The status of a Slingshot® connected device is displayed. A red X will display on this indicator if a Field Hub is not connected or not detected. When a Field Hub is connected to the ROS device, this area will display the current signal strength for wireless communication status.

This indicator displays the current status of the position solution. This indicator will display:

• Green if the status of GPS is okay

• Yellow if an error or cautionary condition has been encountered

• Red if GPS is non-functional

• Gray if GPS is not detected.

A software update is available for the field computer. See Updates Overview for more information on updating the field computer.

N/A

The status of a remote support session. When the icon is green, a remote support session is active. When the icon is gray, a remote support session is not active. See Enable Remote Support for more information on activating remote support sessions.

N/A

The forward/reverse status indicator shows if the machine is traveling forward or reverse according to the ROS device.

N/A

The status of a connected USB drive. Three small dots indicate that CRX is scanning the connected USB drive. The large dots and arrow indicate that CRX is transferring files between the connected USB drive.

N/A

The status header displays the status of wireless file transfers with an Internet connection. If a file transfer is in progress, the file transfer indicator will display a green “in progress” status.

N/A

This indicator displays the status of telematic messages received from the engine, including information such as fuel levels, DEF levels, RPM, and run-time hours. This information is then sent to Slingshot®. This indicator will display:

• Green if any information is being received by ROS

• Gray if no information is being received by ROS

N/A

This indicator displays the communication status for a CANbus system. A green indicator will be displayed when communication is detected without errors.

N/A

This status display indicates the status of ISObus communication with ECUs, working sets The user interface for a system or feature connected to an ISOBUS UT., implements, etc. This status will only be shown if an ISObus ECU Electronic Control Unit is detected by the ROS device.

N/A

This indicator displays the communication status for serial communication ports. A green indicator will be displayed when all configured communication ports.

N/A

Outdoor Sensor is communicating.