End a Job

To close or end a job currently in progress:

1. Select the Home button in the bottom right corner of the display. The Application Report tab will display.

2. Select any information fields and enter any desired or necessary job data or notes regarding the field operation.

3. Select the Weather Report tab.

4. Select the Include Weather Report option at the top of the prompt to include weather information in the job report for the field operation.

5. Select any information fields and enter any desired or necessary weather information or notes regarding weather during the field operation.

6. Weather information may be collected automatically during the field operation if a weather station is connected to the ROS device. Refer to Configure Weather Station Devices in ROS for additional information about using a weather station.

7. Select the Job Complete option if the field operation is finished.

8. The job will still be displayed in the Job Profile panel, but will display a check mark to indicate the job has been completed and does not need to be restarted to complete any operations.

9. If a Slingshot® connected device is connected with the ROS device, select the Send to Slingshot® option to transfer the job to the Slingshot® web service via the wireless network. Refer to the ROS Slingshot® Field Hub Calibration and Operation Manual for assistance with Slingshot® Field Hub set up and operation.

10. Select the Stop button in the bottom right corner of the prompt to close the job and return to the main panel display.

Last Revised: Jul 2024