Create a Flag

Note:  Points of interest were previously called flags in CRX software versions 22.1 and earlier. Please refer to Create a Flag if using a CRX device with software version 22.1 or older, and refer to Point of Interest if using a CRX device with software version 22.2 or newer.

Flags can be used to indicate large rocks or other obstacles that may be present in the field but may not be visible with mature crops.

1. Select the Scout Object icon on the Run screen.
2. Select Add next to Scout Features.
3. Select the Enter Flag Name field and enter the desired name.

   

4. Select the desired recording point for the flag. It can be either centered with the implement, or on either side of the implement.
5. Select Create Flag. The flag will be placed on the run screen.

Last Revised: Jul 2024