Point of Interest

Points of interest can be used to indicate large rocks or other obstacles that may be present in the field but may not be visible with mature crops.

Note:  Points of interest were previously called flags in CRX software versions 22.1 and earlier. Please refer to Create a Flag if using a CRX device with software version 22.1 or older, and refer to Point of Interest if using a CRX device with software version 22.2 or newer.

Create a Point of Interest

To create a point of interest:

1. Select the Scout Object icon on the Run screen.
2. Select Add next to Scout Features.
3. Select the Enter Flag Name field and enter the desired name.

   

4. Select Recording point and set the desired offset point for the point of interest.

   

5. Select Create Point of Interest. The flag will appear on the run screen with a box that indicates the distance from the point of interest.

   

   Note:  If the point of interest is tapped in the list of Scout Features, the point of interest will blink on and off on the run screen. This can be useful when there are many points of interest in the field.

Rename of a Point of Interest

To rename an existing point of interest:

1. Select the Scout Object icon on the Run screen.
2. Select the Edit button on the point of interest that is desired to be renamed.

   

   Note:  This screen will also display longitude, latitude, and altitude information of the selected point of interested.

Last Revised: Jul 2024