Install the Tractor Cables

warning

Use caution while working on the cab roof or standing on exterior surfaces. Surfaces may be uneven or slippery and hardware or harnesses may present tripping hazards. Contact a local equipment dealer for additional information or assistance with working on the roof or from an elevated position on a specific make and model machine.

Note:  Make sure to stay off the tractor roof, damage can occur to the roof from excessive weight.

  1. Disconnect the factory cable from the roof bulkhead on the machine.

  2. Connect the factory cable to the "Roof Bulkhead Pass Through" connector on the tractor Raven Cart Automation™ roof cable (P/N 115-2612-001).

  3. Connect the tractor Raven Cart Automation™ roof cable "Roof Bulkhead" connector into the roof bulkhead on the machine.

  4. If a Slingshot® Field Hub is used to transmit RTKClosed Real-time Kinematic corrections into the CGR, connect the Adapter Serial GPS Cable (P/N 115-2610-115) to the tractor Raven Cart Automation™ roof cable (RTK) connector. Please refer to the Slingshot® User Assistance website for more information. Install the Slingshot® Field Hub

    Note:  If not used the "RTK"connector will remain capped.

  5. Connect the tractor Raven Cart Automation™ roof cable "RS Lite" connector to the RS Lite.

  6. Connect the tractor Raven Cart Automation™ roof cable "RCU" connector to the RCU.

  7. The tractor Raven Cart Automation™ roof cable "Aux Pwr" connector is available if other devices need to be installed on the roof. It is not required for normal operation. If not used the "Aux Pwr" connector will remain capped.

  8. Install tie straps to secure the cable to the bracket.

Last Revised: Nov 2023