CRX+ Home Screen Overview

The Home screen provides a basic location display, access to system and machine settings, and options for starting new jobs.

Note: Go to portal.ravenslingshot.com to locate and download Street Maps for use with CRX+.

See Initial Set Up for additional assistance with system setup.
See Start a Job for assistance with starting a job.
See Run Screen Overview for additional information on using tools and features during an in-field operation.

Status Card

The status bar provides a quick reference for status of the CRX+ system and connected devices. Note that some status icons use different icon colors to indicate a different status.

Icon	Name	Description
	GPS No Data	GPS is not detected. For assistance with GPS issues, see View GPS Information.
	GPS Bad	No GPS. For assistance with GPS issues, see View GPS Information.
	GPS Warning	Poor GPS signal. For assistance with GPS issues, see View GPS Information.
	GPS Ideal	GPS is active and receiving a good signal.
	Slingshot® Disabled	Slingshot® is not available. Refer to the Slingshot® operation manual for additional information on Slingshot® functionality.
	Slingshot® Connected	Slingshot®is connected. Refer to the Slingshot® operation manual for additional information on Slingshot® functionality.
	Signal Strength	Strength of wireless signal. Refer to the Slingshot® operation manual for additional information on Slingshot® functionality.
	Remote Support Disabled	Remote support session is not active. See Activate Remote Support.
	Remote Support Active	Remote support session active.
	Steering Controller Disabled	Steering Controller is turned off. If desired, press one of the Steering Controller resume switches on the machine to turn Steering Controller back on. Refer to the Steering Controller operation manual for additional information on Steering Controller operation.
	Steering Controller Not Ready	Steering Controller is not ready to be engaged. Refer to the Steering Controller operation manual for additional information on Steering Controller operation.
	Steering Controller Ready	Steering Controller is ready to operate. Refer to the Steering Controller operation manual for additional information on Steering Controller operation.
	Outdoor Sensor	Outdoor Sensor is communicating.

Footer Tools

The buttons at the bottom of the screen provide easy access to settings and features such as the ISO Universal Terminal (UT A Universal Terminal (formerly Virtual Terminal) is an electronic display or console capable of interfacing with ECUs on an ISOBUS network.), any active alarms or notifications, and also different views for use during an in-field operation. Review the following descriptions of the function of the icons displayed in the footer.

Icon	Name	Description
	Toggle View	Toggle between the 3D/2D guidance view, widget view, and aerial view.
	Notifications	Display information about active alerts or review notification history. See View Notifications.
	Accept	Accept the change or exit the job.
	Cancel	Stop performing the current selection.
	Create Job in a New Field	Start a new job in a new field. See Start a Job.
	Settings	Open the Settings Menu. See CRX+ Settings Menu.
	UT A Universal Terminal (formerly Virtual Terminal) is an electronic display or console capable of interfacing with ECUs on an ISOBUS network.	Open and control components on the ISOBUS.
	Widget View	Display simultaneous view of the job screen and any other available widget. The UT A Universal Terminal (formerly Virtual Terminal) is an electronic display or console capable of interfacing with ECUs on an ISOBUS network. widget is only available in the Widget View for CR12®+.

Last Revised: Mar 2025